Top 10 sources of interior water damage loss in commercial buildings

Roof leaks are responsible for an estimated 15% of commercial water damage claims globally, and are the leading cause of ceiling water damage. Prevent roof leaks with regular inspections and maintenance. Promptly repair any sort of surface breach, and for overseas buildings with exposure to cold winter weather, remove snow and ice as quickly as possible, and fix unhampered water drainage immediately. 

Especially in multistory buildings with stacked plumbing, toilets are a major cause of interior water damage and they make up 15% of losses. Inspect hoses regularly and replace any that are compromised; replace all hoses every three to five years, even if they appear normal.

Though critical for protection from fire, sprinkler malfunctions account for 14% of commercial water damage loss. Make sure that pipes and antifreeze/low temperature alert systems are fire code compliant and are frequently inspected, tested, and repaired.

With a high failure rate after 7 – 10 years, water heaters should be replaced before they have a chance to contribute to cause their typical 11% of water damages. Put a drip pan underneath for small leaks and install an automatic shut off valve near the heater.

HVAC units cause about 8% of all water damage losses, primarily from leaks due to clogged drains, frozen evaporator coils, and pipes that are not properly connected. Follow manufacturer guidelines for a formal HVAC maintenance program.

If a building is empty, it’s less likely that water damage risks will be detected early so vacancy water emergencies account for about 8% of commercial water damage losses overall. Take preventative measures such as shutting water where it’s not needed and installing temperature sensors to maintain the proper temperature to protect machinery or pipes.

Buildings with multiple boilers account for 7% of water claims. Install water barriers and ensure proper drainage. Create a formal preventive maintenance plan schedule and keep up with inspections from a qualified contractor.

The 5% of claims caused by sewer backups are especially messy and undesirable. Often triggered by events such as excessive rain, backups can be avoided by monitoring, and clearing clog-prone areas such as wastewater lines and drainage systems. It’s also advisable to have emergency shut-off systems and drain check-valves to stop backflow into the building.

Water tanks are used for both water supply and fire protection systems — and they account for 4% of water damage issues. Adhere to accepted regulations, standards and codes for water tanks and conduct regular visual and internal inspections. An ultrasound will ensure the integrity of a metal tank.

Extreme weather, construction activity, soil erosion, and the age or material of the water main pipe may all contribute to the cause water main breaks. These incidents account for 3% of water damage claims but are generally major. If possible, consider replacing water mains over 60 years old or made of iron, which are more susceptible to breakage.