X
skip to main content
Home and Contents

9 tips for preventing fires during building and renovation work

08/2022
video call laptop

If you’re planning a home maintenance or renovation project, don’t let your dreams go up in smoke before the work is finished. Fire—including spontaneous combustion—poses a real and dangerous risk.

To avoid potential fire hazards, homeowners can educate and supervise all contractors to ensure all precautions and measures are considered. Safeguard your home by sharing these 9 simple fire safety tips with your contractor, or other workers.

 

  1. Discard oily rags properly.

    Oil- and solvent-soaked rags will spontaneously combust, even under normal weather conditions; the warmer the weather, the quicker the rags can reach ignition temperature. Used rags or wiping cloths should NEVER be allowed to pile up around the house.

  2. Safely store products and supplies.

    Paints and solvents should not be kept near heat-generating equipment or vehicles.

  3. Keep the work site clean and dispose of materials properly.

    Waste material, packing materials, wood shavings must be removed daily. DO NOT:

    • Use fires as a disposal method.
    • Ball up, pile, stack or fold any wiping cloth, rag, towel, drop cloth, steel wool or piece of work clothing that becomes moistened or wet due to contact with a solvent-based material.
    • Toss used rags into a trash can or plastic bucket.
  4. Know what flammable materials are being used.

    Ask that all flammable paints be kept off the site if possible.

  5. Initiate a no smoking policy.

    Smoking is the single most common cause of fire-related fatalities. This also applies to e-cigarettes and vaping devices.

  6. Ensure there is a fire extinguisher on site.

    Make readily accessible firefighting equipment such as fire extinguishers, hoses, hydrants and emergency water tanks—and make sure everyone knows how and when to use it. Water extinguishers should not be used on electrical fires, for example.

  7. Implement a fire alarm procedure.

    In the event of a fire, determine who will be responsible for calling the fire department, who will deal with the fire, and who will set the evacuation plan in motion.

  8. Follow gas cylinder safety protocols.

    If gas cylinders are being handled, ask that they are safely secured in an upright position and fitted with a regulator and flashback arrester.

  9. Implement “hot work” guidelines.

    Hot work involves working with ignition sources near flammable materials, such as welding, soldering and cutting. Make sure your building team clears the work area of combustible material and that wooden floors are properly covered before doing any hot work.

     

If you would like to find out more on how you can protect your home, leave your contact details via the 'Contact Me' button below and our representatives will get in touch with you.

 

No part of this article may be reproduced in any written, electronic, recording, or printed form without written permission of Chubb.

Disclaimer - The content of the above article is not intended to constitute professional advice. Although all content is believed to be accurate, Chubb Insurance Singapore Limited (Chubb) makes no warranty or guarantee about the accuracy, completeness, or adequacy of the content of this article. Users relying on any content do so at their own risk.

Contact us
Contact us

Protect your home and valuables

Get a quote online or leave your contact details and our representatives will get in touch with you.